Quality, Compliance & Certification
Quality at ANADANI GROUP is not a claim — it is a document. Every product family we trade is governed by a written technical specification that defines the quality, performance and compliance requirements, together with the inspection criteria, testing methods, sampling plan and acceptance rules applied to every lot.
Quality policy
Written down, or it does not count.
The technical specifications published here are based on the purchasing specifications, the development documents and the approved technical requirements for each product category, and are subject to update once the final commercial specifications are approved. A supplier is qualified against them before a first order, and every lot is inspected against them before it moves.
How we work
From specification to delivery.
Sourcing
Manufacturer selection and audit against our technical specification.
Quality control
Sampling and testing methods appropriate to each product category, applied against the relevant technical specifications and standards.
Compliance & certification
The documents and certificates required for a shipment are determined by the product type, the importing country and the applicable regulatory and contractual requirements.
Logistics
Packaging, labelling, load securing and shipment planning to the agreed Incoterms.
Delivery & support
Documented handover and ongoing commercial and technical support.
Standards library
What each standard actually measures.
Sampling and testing methods appropriate to each product category are applied, in accordance with the relevant technical specifications and standards. For solid biofuels, EN ISO 18135 applies where applicable.
| Standard | What it measures |
|---|---|
| ISO 17225-2 | Graded wood pellets — dimensions, moisture, ash, calorific value and durability classes. |
| ISO 17225-3 | Graded wood briquettes — dimensions, density, moisture and ash classes. |
| EN ISO 18134-1 | Moisture content, by the oven-dry method. |
| EN ISO 18122 | Ash content, in a muffle furnace at 550 °C. |
| EN ISO 18123 | Volatile matter, in a muffle furnace at 900 °C. |
| EN ISO 18125 | Net calorific value, by bomb calorimeter. |
| EN ISO 17828 | Bulk density, by the volumetric method. |
| EN ISO 17831-1 | Mechanical durability, by tumbling box. |
| EN ISO 18846 | Fines content, by sieving. |
| EN ISO 16994 | Chlorine and sulphur, by elemental analysis. |
| EN ISO 16948 | Nitrogen, by elemental analysis. |
| EN ISO 18135 | Sampling of solid biofuels — the plan that makes every other test representative. |
| EN ISO 20345:2022 | Personal protective equipment — safety footwear requirements and test methods. |
Compliance
Compliance & Quality Requirements.
Requirements apply by product category, not across the group. Below is what each category is required to meet; what a given lot or model actually carries is stated in its own documentation.
Safety footwear
LUXSAFE
- EN ISO 20345:2022
- CE marking required where applicable
Biomass fuels
LUXORA
- ISO 17225-2
- ISO 17225-3
- ENplus® A1 where contractually required and applicable to the product
- FSC® / PEFC™ where applicable, depending on source and contract
- EN ISO 18135 where applicable
Heating appliances
THERMOLUX
- CE marking required where applicable
Energy storage
ESTAVON
- CE marking required where applicable
- RoHS
- UN 38.3
Pharmaceuticals
ELYNVORA
- GMP requirements
Food oils
VEOLENA
- Specification set by the importing country
Materials & substances
- REACH
Laboratory & testing
- ISO/IEC 17025 accredited laboratories, when required
This website
- GDPR
CE marking is required where the applicable European legislation covers the product. It is the manufacturer’s declaration against the directives that apply to that product, evidenced in the product’s own conformity documentation — not a certificate held at group level.
Documentation
The set is determined per shipment.
The documents and certificates required for a given shipment are determined by the product type, the importing country, and the applicable regulatory and contractual requirements.
- Certificate of Analysis (CoA)
- ENplus® A1 certificate, where contractually required and applicable to the product
- FSC® / PEFC™ documentation or certificates, where applicable and depending on the product’s source and the contractual requirements
- Certificate of Origin (CoO)
- Material Safety Data Sheet (MSDS)
- Packaging specification and labelling confirmation
Laboratory & testing
The methods behind the numbers.
- Moisture (as received)Oven-dry methodISO 18134-1
- Ash (dry basis)Muffle furnace at 550 °CISO 18122
- Volatile matter (dry basis)Muffle furnace at 900 °CEN ISO 18123
- Net calorific valueBomb calorimeterISO 18125
- Dimensions (L × W × H)Calibrated calliper / sieveISO 17225-2 / -3, ISO 17829
- Bulk density (as received)Volumetric methodISO 17828
- Mechanical durabilityTumbling boxISO 17831-1
- Fines (< 3.15 mm)SievingISO 18846
- Chlorine / Nitrogen / Sulphur (dry)Elemental analysisISO 16994 / ISO 16948
Measurement & test methods
Certificates
Verified registration.
ANADANI GROUP S.à r.l. is a registered Luxembourg company. Product and chain-of-custody certificates are issued per supplier and per shipment where they apply to the product, and are provided on request with the commercial documentation.
- Matricule
- 2018 2426 084
- TVA
- LU30313287
- RCS
- B224256
Product certificates are supplied where they apply to the product and the shipment. We do not publish certificate scans we have not verified.
Let's build a lasting partnership.
Tell us what you need — a product specification, a quotation, a distribution agreement, or representation in a new market.
7, Grand-Rue, L-4132 Esch-sur-Alzette, Luxembourg